Software für Reparatur & Wartung

Nassima führt einen Reparatur & Wartung-Betrieb von Anfang bis Ende — von der ersten Anfrage bis zur bezahlten, konformen Rechnung. Beschreiben Sie, was Sie brauchen, und das System baut den Ablauf. Ein Abonnement, keine Provision auf Ihre Kunden.

Womit Reparatur & Wartung-Betriebe wirklich zu tun haben

10 dokumentierte Probleme aus veröffentlichter Forschung zu dieser Branche. Jedes verweist auf seine Quelle.

Customers surprised by final bill after unapproved or uncommunicated changes
A job grows after teardown, and the advisor either leaves a voicemail or doesn't communicate the change at all. At pickup the customer disputes the total, and the shop gets a bad review and loses the customer.
Befund: Ratchet+Wrench lists poor customer communication as a shop bottleneck: changes that are miscommunicated or not communicated cause surprises at payment, bad reviews and lost repeat customers. It recommends photo-based digital inspections and texted follow-ups, with TCPA consent for marketing texts.
Quelle: Ratchet+Wrench – Bottleneck: Lack of Customer Communication
In Nassima
- WhatsApp & Messaging — the AI receptionist answers on WhatsApp day or night, books, quotes and chases from inside the thread, and hands over to a human when it should
- Quotes — quotes go out the same day with the right prices, and the AI follows up on the ones that go quiet until they are won or lost
- Customer Portal — the customer sees their own bookings, quotes, invoices and documents, which removes the calls that exist only to ask for them
Customers decline or put off recommended repairs, and no one follows up
An advisor writes up $1,200 of recommended work, and the customer approves only the oil change. The declined items sit in the RO history with no reminder, so the work is lost or ends up at another shop.
Befund: A MOTOR/industry survey of nearly 700 shops found 50% report customers declining or delaying work, 49% see more caution on non-required repairs than in 2024, and 54% see fewer proactive maintenance visits.
Quelle: MOTOR – Auto Repair Shops Face Cost Uncertainty
In Nassima
- CRM — every enquiry, message and visit lands on one customer record automatically, so history survives staff turnover
- Campaigns — campaigns are built from who actually bought what, and go out on their own rather than when someone finds the time
- WhatsApp & Messaging — the AI receptionist answers on WhatsApp day or night, books, quotes and chases from inside the thread, and hands over to a human when it should
No structured outbound process for declined services
Advisors are supposed to log declined work, but they record it inconsistently and nobody owns the callbacks, so the shop waits for customers to call in. At roughly $250 per RO, a multi-rooftop group estimated it would have lost about $96k in 30 days.
Befund: Ratchet+Wrench profiled a group that had no outbound structure for declined services and relied only on inbound calls. After it started tracking, it set about 385 declined-service appointments a month, which it valued at about $96,000 a month.
Quelle: Ratchet+Wrench – An Answer to Declined Services
In Nassima
- CRM — every enquiry, message and visit lands on one customer record automatically, so history survives staff turnover
- Campaigns — campaigns are built from who actually bought what, and go out on their own rather than when someone finds the time
- WhatsApp & Messaging — the AI receptionist answers on WhatsApp day or night, books, quotes and chases from inside the thread, and hands over to a human when it should
Rising parts prices squeeze margins and make quotes go stale
An independent shop quotes a brake and suspension job, but by the time the customer approves, the supplier price has gone up. The shop either eats the difference or goes back to an already cost-sensitive customer with a higher number.
Befund: IMR's December 2025 survey of 500 repair shops found finding affordable parts / rising prices was the top 2026 challenge at 46%, with overhead costs second at 35.8%.
Quelle: IMR Automotive Research – 2026 Repair Shop Challenges
In Nassima
- Quotes — quotes go out the same day with the right prices, and the AI follows up on the ones that go quiet until they are won or lost
- Inventory — stock moves as jobs consume it, and the system raises the purchase order before a part runs out rather than after
Can't find or keep qualified technicians
When a shop is down a tech, bays sit empty while the schedule is full, so work gets pushed out and customers go elsewhere. Owners end up turning wrenches themselves, which leaves front-office tasks undone.
Befund: IMR's 2026 survey of 500 shops found 23.8% cite finding qualified technicians and 9.6% cite retaining them as a top challenge. Diagnostic tools and software updates were cited by 30%.
Quelle: IMR Automotive Research – 2026 Repair Shop Challenges
In Nassima
- Jobs & Dispatch — the job carries its own schedule, assignee, parts and history, and moves itself through the workflow instead of waiting for someone to update a board
- Multi-branch Reporting — every branch reports into one view without anyone consolidating spreadsheets
Finished cars left unpaid and unclaimed for weeks
After the repair is done, the customer stops answering and the car takes up a spot for weeks. The shop has labor and parts tied up and has to send certified letters, charge storage or go through the lien process to recover anything.
Befund: In an Automotive Management Network thread, owners described cars left for weeks to a month and one abandoned for a year owing over $1,000. Their fixes included certified letters after two weeks, about $15/day storage, deposits on risky vehicles and liens.
Quelle: Automotive Management Network – Policy on customers not picking up cars
In Nassima
- Payments & Payment Links — a payment link goes with the invoice and the AI chases what is unpaid on its own schedule, so collections do not depend on anyone's memory
- WhatsApp & Messaging — the AI receptionist answers on WhatsApp day or night, books, quotes and chases from inside the thread, and hands over to a human when it should
- Invoicing — the invoice is built from the finished job and issued to the local tax rules — ZATCA, FTA or Factur-X — with no re-entry
High card-processing fees and slow payouts through shop software
The shop takes card payments through its management platform, then waits two business days for funds and pays a higher rate than its own merchant account. On thin-margin repair tickets that adds up, and some shops are also billed in USD outside the US.
Befund: Shopmonkey reviewers on Capterra complained of card rates higher than their Elavon account, a two-business-day payout lag, a $524 cancellation charge from an undisclosed 30-day notice term, and Canadian shops being billed in USD.
Quelle: Capterra (Shopmonkey reviews)
In Nassima
- Payments & Payment Links — a payment link goes with the invoice and the AI chases what is unpaid on its own schedule, so collections do not depend on anyone's memory
- Accounting & Bank Reconciliation — takings reconcile against the bank as they land, so the books are current rather than rebuilt at month end
Customers bring their own online parts, killing margin and creating warranty fights
A customer buys a cheap part online and asks the shop only to install it. If the part fails, the shop eats diagnosis and re-labor, gets pulled into a three-way dispute, and may take a bad review, with no parts margin to cover it.
Befund: On Automotive Management Network, shop owners mostly refuse customer-supplied parts, citing warranty liability, lost parts margin, unpaid comebacks and review damage. One described a defective customer thermostat that overheated an engine.
Quelle: Automotive Management Network – Customers Bringing Their Own Parts
In Nassima
- Quotes — quotes go out the same day with the right prices, and the AI follows up on the ones that go quiet until they are won or lost
- Documents & Templates — the paperwork the job needs is generated from the job's own data at the moment it is needed, rather than retyped into a template
- Inventory — stock moves as jobs consume it, and the system raises the purchase order before a part runs out rather than after
No-show appointments leave bays and techs idle for hours
A shop blocks a bay and a tech for a scheduled diagnosis, and the customer never arrives or calls. Two or three hours of billable labor are lost, and without deposits or confirmations owners just pad the schedule for habitual no-shows.
Befund: On AutoShopOwner, owners asked why shops can't charge no-show fees like dentists. One reported losing 2–3 hours per no-show, and others said they simply plan around chronic no-shows instead of penalizing them.
Quelle: AutoShopOwner forum – Charging for missed appointments
In Nassima
- Jobs & Dispatch — the job carries its own schedule, assignee, parts and history, and moves itself through the workflow instead of waiting for someone to update a board
- WhatsApp & Messaging — the AI receptionist answers on WhatsApp day or night, books, quotes and chases from inside the thread, and hands over to a human when it should
- Payments & Payment Links — a payment link goes with the invoice and the AI chases what is unpaid on its own schedule, so collections do not depend on anyone's memory
Shop software weak on inventory, parts returns and multi-location history
The shop management system can't create parts orders from stock levels, track core and warranty returns, or share customer history across locations. Staff re-key data and lose track of returned parts credits.
Befund: Capterra reviewers of Tekmetric asked for better parts return and warranty handling and an inventory system that creates orders. They also noted that customer history isn't shareable across locations and that the QuickBooks back-office sync is all-or-nothing on stock items.
Quelle: Capterra (Tekmetric reviews)
In Nassima
- Inventory — stock moves as jobs consume it, and the system raises the purchase order before a part runs out rather than after
- Multi-branch Reporting — every branch reports into one view without anyone consolidating spreadsheets
- Accounting & Bank Reconciliation — takings reconcile against the bank as they land, so the books are current rather than rebuilt at month end

Probleme und Zahlen auf dieser Seite stammen aus veröffentlichter Forschung, jeweils mit Quelle. Sie beschreiben die Branche, kein Ergebnis eines Nassima-Kunden.

Beschreiben Sie Ihren Reparatur & Wartung-Betrieb, und Nassima baut das System darum herum.

Loslegen

Passt Nassima zu einem Reparatur & Wartung-Betrieb?

Passt gut, wenn

Sie Termine, Angebote, Rechnungen und Kundennachrichten in getrennten Tools jonglieren.
Sie ein System für das ganze Team wollen statt fünf, die nicht miteinander sprechen.
Sie Nachfassen, Erinnerungen und Papierkram erledigt haben wollen, ohne jemanden dafür einzustellen.

Nicht das richtige Werkzeug, wenn

Sie nur eine Funktion brauchen — nur einen Kalender oder nur Rechnungen — und der Rest Ihrer Tools passt.
Sie die tiefen Spezialfunktionen eines Werkzeugs brauchen, das nur für diese Branche gebaut ist, und es gern daneben betreiben.
Sie ein kostenloses Werkzeug suchen. Nassima ist ein kostenpflichtiges Abonnement.

Sehen Sie es an Ihrem eigenen Betrieb